Sponsored Links
The Ford Taurus X evaporator is mounted with the heater matrix. The evaporator creates the drop in pressure required to produce the cooling effect. It absorbs heat from the air inside the car which evaporates the refrigerant. Here is a typical schematic describing the 2008 Ford Taurus X Evaporator Parts and Components Assembly Diagram.
Below schematic shows the typical diagram of Jeep Wrangler Accumulator Assembly Components and Parts. The 2000 Jeep Wrangler accumulator is mounted in the engine compartment between the evaporator coil outlet tube and the compressor inlet.
1 – LOW PRESSURE CYCLING CLUTCH SWITCH
2 – PRESSURE SWITCH FITTING
3 – OUTLET TO COMPRESSOR
4 – ANTI-SIPHON HOLE
5 – DESICCANT BAG
Here is a typical schematic diagram of the 2009 Volvo V70 AC Heater and Evaporator Parts Components Assembly.
1) AC and heater assembly without air quality system
2) Air inlet case
3) Fan case
4) Fan and motor
9) Evaporator core Bracket
10) Expansion valve
11) Heater core
Here is a typical schematic of the BMW E93 335i Condenser Compressor Coolant Lines Diagram, Parts and Components Assembly. 1. Condenser-Compressor Pressure Hose Assembly 2. Evaporator-Compressor Suction Pipe 3. Condenser-Evaporator Pressure Hose 4. Pressure Sensor 5. Universal Socket Housing
The following schematic shows the 2005 Dodge Magnum Heater Evaporator Components Parts Diagram. 5. Blower case without dual zone control 6. Blower motor 7. Evaporator 8. Expansion valve 9. O-ring Suction line
